Kitchen worktop fitting in Leagrave, Luton. Laminate, solid wood and composite worktops cut, jointed and sealed properly, with cut-outs for sinks and hobs.
Replacing just the worktops is one of the best-value changes you can make to a kitchen in Leagrave, where plenty of houses have sound units and tired, chipped or stained surfaces. New worktops change the look of the room without the cost and upheaval of a whole new kitchen.
The joints are where worktop fitting is judged. Laminate worktops are joined with a mason's mitre cut with a jig and a router, bolted from underneath and sealed so water cannot get into the core. A badly cut joint swells within months and there is no fixing it afterwards.
Solid wood worktops are beautiful in the right Leagrave kitchen, but they move with moisture. They are oiled on every face, including the underside and the cut-outs, and fixed so they can expand and contract without cracking.
Sink and hob cut-outs are made accurately and the exposed edges sealed, because the edge of a sink cut-out is where water finds its way in first. Undermounted sinks need a worktop material that can take them, which rules out standard laminate.
Composite and stone worktops are templated after the units are in and fitted by specialists, and we can arrange that and fit around it.
The old worktops come off carefully so the units underneath are not damaged, and the upstands or splashback are finished to match. Doors that no longer close square, a worktop lifting at a joint, or water marks under the sink are worth looking at before a new kitchen goes in.
Cut with a jig, bolted and sealed so they stay tight.
Including cut-outs and undersides.
Solid wood allowed to expand without cracking.
For sinks and hobs, with sealed edges.
Composite and quartz templated and fitted by specialists.
To match the new worktop.
Send a photo or a quick video of the room on WhatsApp, or get a free fixed quote — no obligation, and we’ll tell you straight what it needs.
Yes - it is one of the most common jobs in Leagrave and gives a big change for the money.
Quartz and composite are the toughest; good laminate is very practical; wood needs oiling.
Laminate or wood is usually one to two days; stone depends on templating.
Yes, with a solid wood, composite or stone worktop - not standard laminate.
Not if they are level and sound; we check before cutting.
We handle the sink; gas hobs need a Gas Safe engineer.
Leagrave, Luton and nearby.